Victorian chimney with clay pots, newly rendered stack and lead flashing, Glastonbury chimney repairs

Chimney Repairs
in Glastonbury
& Somerset

Stop damp patches and loose brickwork at the source with a chimney that is repointed, sealed and flashed properly, before it becomes a safety risk.

10 years
Roofing experience
9.96/10
Checkatrade rating
£1 million
Public liability
Free
Homeowner inspections
Fixed
Prices, no day rates
Overview

Chimney repairs that keep water and weather out

Chimneys are the most exposed part of any house. They catch wind and rain on every face, and the joints between brick, mortar, flaunching and lead are constantly working. When any one of these fails, water gets into the stack and down into the rooms below.

Chimney repairs cover repointing failed mortar joints, replacing cracked flaunching around the pots, renewing or resetting pots and cowls, replacing lead flashings and soakers, and partially or fully rebuilding stacks that have become unstable.

Many chimney leaks are blamed on the roof, and many roof leaks are blamed on the chimney. Travis inspects both and shows you photos of exactly where water is getting in, so you only pay for work that solves the problem.

Recent work

Chimney Repairs we've completed

Crumbling brick chimney stack before repair, showing failed pointing on a Somerset roofRendered chimney stack with new lead flashing on a tiled roof, chimney repair in Somerset
See all our work
The risk of waiting

What a neglected chimney leads to

A chimney deteriorates from the top down, and the consequences can be serious.

Damp chimney breasts

Stains and peeling paint on chimney breasts, often in upstairs bedrooms.

Falling debris

Loose bricks, pots or flaunching can fall onto the roof, gutters or garden below.

Leaking roof around the stack

Failed flashings let water run into the roof timbers around the chimney.

Frost damage

Water in brick and mortar freezes and expands, cracking the stack further each winter.

Leaning stacks

Long-term weathering can leave a stack unstable and in need of rebuilding.

Common mistakes homeowners make

  • Covering failed flashings with sealant or flashband instead of renewing the lead.
  • Repointing with hard cement on older brick that needs a softer mortar.
  • Ignoring cracked flaunching because it can't be seen from the ground.
Warning signs

Signs you need chimney repairs

  • Damp or stained chimney breasts inside the house
  • Pieces of brick, mortar or pot found on the roof or in gutters
  • Visible gaps in the mortar joints of the stack
  • Cracked or missing flaunching around the pots
  • Lead flashing lifted, split or sealed over with mastic
  • A stack that looks out of plumb from the street
Pricing

What affects the price

We don't publish prices because every roof is different. After a free inspection you get one fixed price. These are the things that shape it.

Access

Most chimney work needs scaffolding or safe roof access, depending on the height and position of the stack.

Scope of work

Repointing, flaunching, pots, flashings and full rebuilds are priced on what your chimney actually needs.

Materials

Older brick and stone need suitable softer mortars, and matching reclaimed bricks takes time to source.

Shared stacks

Chimneys shared with a neighbour may need coordinating, which we can help with.

Our process

How we handle your chimney repairs

  1. 01

    Close inspection

    The stack, pots, flaunching and flashings checked up close and photographed.

  2. 02

    Diagnosis and options

    We explain what has failed and whether repair or rebuild is needed.

  3. 03

    Safe access

    Appropriate access arranged so the work is done safely and properly.

  4. 04

    Repair work

    Repointing, flaunching, pots and leadwork completed to suit the chimney's age and materials.

  5. 05

    Final check

    Junctions checked, debris cleared and before-and-after photos shared.

What you get

The benefits, in plain terms

Dry chimney breasts

Fixing the source stops damp returning after you redecorate.

Safer stack

Secured pots and sound brickwork remove the risk of falling debris.

Longer chimney life

Good repointing and flaunching protect the brick from frost damage.

Right materials

Mortars chosen to suit the age and type of brick or stone.

Clear evidence

Photos of the problem and the finished work, not just a description.

Guaranteed work

A written guarantee on completed chimney repairs.

In detail

Chimney repairs in detail

Somerset chimneys range from brick stacks on 1930s semis to stone stacks on period cottages. These are the repairs we carry out most often.

“Roof work was carried out very efficiently and to a high standard. I was kept fully informed at all times about the job as it progressed.”
Checkatrade customer · BA4 · Checkatrade

Repointing

Over time mortar joints erode and let water into the stack. We rake out failed joints and repoint with a mortar suited to the brick or stone: softer mixes for older properties so the masonry can breathe and doesn't crack.

Flaunching and pots

Flaunching is the mortar collar at the top of the stack that holds the pots and sheds water. Cracked flaunching is one of the most common causes of chimney leaks. We renew it, reset or replace pots, and can fit cowls or caps to disused flues.

Lead flashings and soakers

The junction between the chimney and the roof is sealed with lead flashings, soakers and back gutters. We renew these in properly dressed code lead, chased into the brickwork rather than stuck on.

Chimney rebuilds

Where a stack is leaning, badly cracked or the brickwork has deteriorated too far, we take it down to a sound level and rebuild it, reusing original bricks where possible to keep its appearance.

Removing redundant chimneys

If a chimney is no longer used and is causing problems, removing it below roof level and tiling over can be an option. We'll discuss whether this is suitable for your property.

Why homeowners choose Travis

Why choose TB Property Maintenance and Roofing for chimney repairs

You deal with the roofer, not a salesman

When you call about chimney repairs, you speak to Travis. He inspects the roof, prices the work and carries it out himself, bringing in trusted labourers only on larger jobs. There's no handover between a surveyor, an office and a crew, so nothing gets lost along the way.

Evidence before every decision

You see photos of the problem before you're asked to spend anything. If extra work turns up once the job starts, you're shown the evidence and the options before anything changes. One customer put it simply: he kept them informed of any extra work needed, with evidence.

A fixed price, not a day rate

Every chimney repairs job is quoted at a fixed price after a free inspection. You know the full cost up front, and it doesn't creep up if the job takes longer than expected. Travis prefers not to publish prices online, because guessing without seeing the roof helps nobody.

Reviewed, insured and accountable

TB Property Maintenance and Roofing is a Checkatrade member rated 9.96/10 by verified customers, with £1 million public liability insurance. Work is guaranteed, and the terms for your job are confirmed in writing with the quote. Reviews regularly mention turning up on time, working tidily and finishing on budget.

Local knowledge

Chimney Repairs across Glastonbury & Somerset

Older housing in Glastonbury, Wells and Somerton often has tall brick or stone chimney stacks fully exposed to the weather. Many have decades of cement patch repairs that trap moisture in the brickwork.

Checkatrade reviews of our chimney and roof repairs mention clear explanations, good options on how to proceed, and work done to a very good standard.

Every job is handled by Travis Biddle personally, with 10 years in the trade, £1 million public liability insurance and a 9.96/10 Checkatrade rating. You get a fixed price after a free inspection, photo evidence of any problem, and nothing added without your agreement.

FAQs

Chimney Repairs questions, answered

Can't see yours? Call Travis on 07916 735568.

01

How much do chimney repairs cost?

+

It depends on the work needed and access. We give a fixed price after a free inspection.

02

Why is my chimney breast damp?

+

Common causes are failed flaunching, eroded mortar, missing caps on disused flues, or failed flashings. The inspection pinpoints which.

03

Do I need scaffolding for chimney work?

+

Often, yes, for safe access. We'll explain the access needed with your quote.

04

Can you replace chimney pots?

+

Yes, we reset or replace pots and fit cowls or caps where needed.

05

Should I repoint or rebuild my chimney?

+

If the brickwork is sound, repointing is usually enough. If the stack is unstable or badly damaged, rebuilding is safer. We'll show you the evidence.

06

Are chimney repairs guaranteed?

+

Yes. Guarantee details are confirmed in writing with your quote.

07

How long does chimney repair take?

+

Most repointing and flaunching jobs are completed quickly once access is in place. You'll get a timescale with your quote.

08

Which areas do you cover for chimney repairs?

+

Glastonbury, Street, Wells, Shepton Mallet, Frome, Trowbridge, Bridgwater, Cheddar, Somerton and Weston-super-Mare.

Stop chimney damp
at the source

Book a free inspection. You'll see photo evidence of the problem and get a fixed price before anything is done.

  • £1 million public liability insurance
  • Checkatrade member, rated 9.96/10
  • Fixed prices, no day rates
  • Guaranteed work, confirmed in writing
Call Travis direct07916 735568
Call NowFree Quote